Search:

Type: Posts; User: TKO MOTORSPORTS TEAM

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. "off set wedges"???? Im guessing your using the...

    "off set wedges"???? Im guessing your using the offset washer plates to lock in camber and caster and you have factory rubber bushings?
  2. Hello Mike. Sounds like you have what we call...

    Hello Mike.

    Sounds like you have what we call a " snap loose" problem. Does the car " snap loose" in the turn when you hit a bump or put a little more steering wheel into the turn say on a...
  3. Tko motorsports 2021 racing

    https://tkomotorsports.com/tko-race-team-2021/
  4. Tkosrod1493k 2003 2017 dodge viper camber caster lock out plate kit 1365 51

    49495494964949749498
    $1365.51 complete kit front and rear

    A big problem with the Dodge Viper is keeping your suspension in proper adjustment. Hard driving or driving your Viper on the track,...
  5. Nice job! Street courses can be intimidating...

    Nice job! Street courses can be intimidating ,tight and very unforgiving ( old news ) ; Now that you have run one....... regular old road courses will seem like giant runways with miles of run off. ...
  6. Tkosrod1391k 2013 2017 dodge viper racing transmission mount

    TKOSROD1391K 2013-2017 DODGE VIPER RACING TRANSMISSION MOUNT 285.54

    4939949400

    2013-2017 DODGE VIPER RACING TRANSMISSION MOUNT
    One of the weak points in the 2013-2017 Dodge Viper is the...
  7. If your within 2 mph and couple hundred RPM below...

    If your within 2 mph and couple hundred RPM below 100mph your are doing pretty good. Top speed estimates you will find your speed will be off. Calculators and formulas are usually " LAB" conditions ...
  8. As long as you know calculators and simulators...

    As long as you know calculators and simulators are just to get you in the ball park they are great tools. Solid parts like gears are pretty dang accurate for the most part; Soft parts like tires are...
  9. Not much of a difference in peoples mentality on...

    Not much of a difference in peoples mentality on track if they paid 20 bucks or 10k bucks to be there. The people who paid 10K bucks just have better safety equipment.
  10. Replies
    13
    Views
    522

    Trans leaking through vent tube is real common on...

    Trans leaking through vent tube is real common on all T56 magnum trans ( gen 3-5 vipers) . We have a trans breather kit we mfg and install on customer cars that solves the problem. The kit not listed...
  11. Yes tires seem to be difficult for everyone to...

    Yes tires seem to be difficult for everyone to find right now; Once the world gets back to normal it should be easier. If you decide to switch to 18" make sure brakes clear and tire size stays...
  12. Im guessing your running compressed air? 2.4 bar...

    Im guessing your running compressed air? 2.4 bar (34psi) hot is a little high 26-28psi hot will work alot better and help tire wear and improve grip all around. If your running air hitting 26-28...
  13. Blistering front tires or just plain killing them...

    Blistering front tires or just plain killing them is caused by setup off or over driving car. Very common we all over drive the car sometimes amateur's and pro trying to squeeze out just a bit to...
  14. Why be a guinea pig; We have been there done that...

    Why be a guinea pig; We have been there done that learn from our expensive mistakes. Rev limiter at 6800rpm you should be ok with hydraulic on track. Its not the lifter thats the problem its the oil...
  15. Over heating????

    Over heating????
  16. 7000rpm can get a little dicey on a hydraulic...

    7000rpm can get a little dicey on a hydraulic viper motor.
    Gear ratio calculators and simulators are just references never absolutes since most of them don't account for all variables...
  17. Gen 3,4 we have not personally checked fit here...

    Gen 3,4 we have not personally checked fit here in the shop. More then likely no problem on the front sway bar for gen 3,4. The rear sway bar gen 3 ,4 there were different diameters and shaped bars. ...
  18. Tips and track tweaks tweaks and track tips 9 27 21

    WET CONDITIONS, LOW GRIP DAY
    49244

    For some of us adverse track conditions can be a great equalizer and for others it can be a humbling experience punctuated by 4 letter words, a side order of...
  19. Tkosrod1284k 5th gen viper no bind sway bar pillow blocks

    TKOSROD1284K 5TH GEN VIPER NO BIND SWAY BAR PILLOW BLOCKS 913.78 complete set front and rear
    49240492374923849239
    5TH GEN VIPER NO BIND SWAY BAR PILLOW BLOCKS
    Urethane or rubber sway bar pillow...
  20. Have you baselined car yet at an autocross event?

    Have you baselined car yet at an autocross event?
  21. Replies
    26
    Views
    714

    We run the same setup on the street as we do the...

    We run the same setup on the street as we do the track. Toe, camber and caster same as track for most of our customer cars. There is no real benefit for alot of viper owners to have a street set up...
  22. Replies
    26
    Views
    714

    Toe in works better in front since the viper is a...

    Toe in works better in front since the viper is a heavy front engine car and has a problem with excessive tire wear especially gen 5 . The toe out rule was based off rear engine light weight cars and...
  23. Great questions EZ 2B green!. You can install...

    Great questions EZ 2B green!. You can install our bump-steer kit on completely bone stock vipers and still get the benefits. If you install our control arm bushing kit and our bump-steer kit you...
  24. Thank you Aevus really appreciate you talking up...

    Thank you Aevus really appreciate you talking up our product. We always encourage and appreciate all our customers to give us feed back. Thank you once again for taking the time. .............And it...
  25. making viper suspension parts

    candid look in house at TKO Motorsports mfg. How a simple little machined nut becomes one piece of a larger viper performance part kit
    ...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4