Results 1 to 5 of 5
  1. #1
    VOA Mamba Member
    since 2017
    South Central Texas

    Join Date
    Dec 2016
    Posts
    4

    Need Help replacing Fuel Injectors and found an o ring Missing

    I am looking for some advice on an issue that came up this weekend. While replacing the Fuel Injectors in a 94 Viper I noticed that one of the injectors that I removed is missing the lower o-ring. Has anyone been thru this scenario?
    Thanks
    TimM

  2. #2
    Enthusiast
    Join Date
    Oct 2014
    Location
    At mopar buying parts
    Posts
    1,136
    What scenario? Replacing fuel injectors? Or putting it back together with all the seals present? I would say it's all been done before. Yes.

    But when was the last time you flushed your coolant?
    Red. Because I didn't have to settle for blue.

  3. #3
    I just replaced my fuel injectors. Dont worry about it just make sure the new one's have it.

  4. #4
    Enthusiast SlowPoke McGee's Avatar
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    245
    https://www.viperpartsrackamerica.co...ckage-04723971


    dave6666 said:
    22 Hours Ago
    What scenario? Replacing fuel injectors? Or putting it back together with all the seals present? I would say it's all been done before. Yes.

    But when was the last time you flushed your toilet?

    Fixed it.
    Last edited by SlowPoke McGee; 5 Days Ago at 07:01 PM.

  5. #5
    Tech Team

    Supporting Vendor
    Viper Specialty's Avatar
    Join Date
    Oct 2013
    Location
    Buffalo, NY
    Posts
    500
    I would not be surprised if the O-RIng is still in the port or fell into the engine. If that O-Ring was actually missing, all of your fuel would be dumped into that cylinder.
    Dan Lesser
    Viper Specialty Performance
    www.ViperSpecialty.com
    (716) 912-5336

    VOA Tech Team

    .



 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •