Results 1 to 24 of 24
  1. #1
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209

    GEN 3 Gen 4 Upper Door Inside Trim reproduction

    I have replicated the Upper Door Inside Trim, and made from the same material as factory . These pieces are known to crack and haven't been available for the last 7-10 years, unless you find a used complete door card at a much Higher cost . I'll be bringing 4 Trim pieces with me to the Woodward Dream Cruise on August 17th to gauge interest and look at possibly making 6-8 more .

    The cost of the ones I have will be $230 U.S. and if they sell on August 17th , then I'll look at moving forward with more ...
    There is an option to buy them in Raw form and customer sands and preps for $165 each.
    If you are interested call me at 416 576 0845

    . Pics below showing the Trim




    Last edited by J TNT; 4 Weeks Ago at 06:05 PM.
    White Mamba ,

  2. #2
    VOA Mamba Member
    since 2018
    VA/MD/DC/DE

    Join Date
    Aug 2016
    Location
    VA
    Posts
    84
    Possibly a stupid question, but why go to the trouble to repro them and make them in the exact same material / configuration that will just crack again when looked at funny?
    2006 SRT-10

  3. #3
    VOA Mamba Member
    since 2013
    New England
    EZ 2B Green's Avatar
    Join Date
    Nov 2013
    Posts
    422
    Looks great! Nicely done.
    2008 SSG Roadster (Sold)
    2017 Afterburner Orange GTC
    Thank you Detroit!

  4. #4
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by V10Sidepipes View Post
    Possibly a stupid question, but why go to the trouble to repro them and make them in the exact same material / configuration that will just crack again when looked at funny?
    These are slightly thicker on the top side were they crack . And are New material . If I went with Aluminum it would drive the cost up to over $700 per unit, and most wouldn't pay that........
    It also maintains the factory look . Feel free to swing by on August 17th and have a look .

    - - - Updated - - -
    White Mamba ,

  5. #5
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by EZ 2B Green View Post
    Looks great! Nicely done.
    Thanks Mike !
    White Mamba ,

  6. #6
    VOA Mamba Member
    since 2018
    VA/MD/DC/DE

    Join Date
    Aug 2016
    Location
    VA
    Posts
    84
    Quote Originally Posted by J TNT View Post
    These are slightly thicker on the top side were they crack . And are New material . If I went with Aluminum it would drive the cost up to over $700 per unit, and most wouldn't pay that........
    It also maintains the factory look . Feel free to swing by on August 17th and have a look .

    - - - Updated - - -


    I’m in for a set if/when you start shipping.
    2006 SRT-10

  7. #7
    Enthusiast
    Join Date
    Aug 2018
    Location
    Vancouver, BC
    Posts
    1
    Quote Originally Posted by J TNT View Post
    I have replicated the Upper Door Inside Trim, and made from the same material as factory . These pieces are known to crack and haven't been available for the last 7-10 years, unless you find a used complete door card at a much Higher cost . I'll be bringing 4 Trim pieces with me to the Woodward Dream Cruise on August 17th to gauge interest and look at possibly making 6-8 more . The cost of the ones I have will be $180 U.S. and if they sell on August 17th , then I'll look at moving forward with more ...
    If you are interested call me at 416 576 0845 before August 12th . Pics below showing the Trim
    Im in for a pair, I was just looking at buying a door card to get these pieces.
    I will text you tomorrow.

    Thanks

  8. #8
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by Rialb View Post
    Im in for a pair, I was just looking at buying a door card to get these pieces.
    I will text you tomorrow.

    Thanks
    Sounds good ! Or call after 6:00 pm
    White Mamba ,

  9. #9
    VOA Mamba Member
    since 2019
    VA/MD/DC/DE

    Join Date
    Sep 2018
    Posts
    44
    I'm down. Where do I send my money ��

  10. #10
    Enthusiast sambo32's Avatar
    Join Date
    Feb 2014
    Location
    New York
    Posts
    168
    Interested
    2009 coupe - victim of Hurricane Sandy, 2013 Track Pack (Sold), TA #93 (Sold)
    2015 Billet silver SRT (Sold), 2009 coupe yellow with silver stripes
    2016 Ram Rebel white

  11. #11
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by sambo32 View Post
    Interested
    Give me a call at 416 576 0845 after 9:00 am tomorrow !
    Thanks
    White Mamba ,

  12. #12
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    I'm down to my last 5 sets of trim pieces , if anyone needs them let me know . This will be my last production run for this year.......
    White Mamba ,

  13. #13

  14. #14
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by nautoncall View Post
    I am
    You have a pm .
    White Mamba ,

  15. #15
    Got mine installed and they look great! Love them Jay, great work. Most impressive part! No more rattle!!!!

  16. #16
    VOA Mamba Member
    since 2019
    VA/MD/DC/DE

    Join Date
    Sep 2018
    Posts
    44
    Sadly I have mine sitting in the shipping tube for months... any tips on the install? What/how did you attach the new trim to the door card?

  17. #17
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by Jmerk1031 View Post
    Got mine installed and they look great! Love them Jay, great work. Most impressive part! No more rattle!!!!
    Thanks Jmerk glad to hear you are Happy with them !

    Quote Originally Posted by Zubik View Post
    Sadly I have mine sitting in the shipping tube for months... any tips on the install? What/how did you attach the new trim to the door card?
    Zubik send me a pm with your cell number and I'll reach out to you on Sunday .
    Thanks
    White Mamba ,

  18. #18
    VOA Mamba Member
    since 2019
    VA/MD/DC/DE

    Join Date
    Sep 2018
    Posts
    44
    I've been a bit busy and keep forgetting to call. I'll give you a ring.

  19. #19
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    I'm looking at doing one last run of door trim pieces for 2020 . These haven't been available from FCA for the last 10 years . And are notorious for breaking ...
    Let me know if you're interested ..........

    Jay
    White Mamba ,

  20. #20
    VOA Member
    since 2013
    Colorado/Montana/Utah/Wyoming
    Bluecoupe's Avatar
    Join Date
    Oct 2013
    Location
    Fort Collins, CO
    Posts
    153
    I am interested in a set for my gen 3 coupe
    Dan St John
    2006 Blue Coupe / Silver Stripes.

  21. #21
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Quote Originally Posted by Bluecoupe View Post
    I am interested in a set for my gen 3 coupe
    PM Me your cell number .
    Thanks
    Jay
    White Mamba ,

  22. #22
    Good day, possibly interested in a set!

  23. #23
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Anyone serious about Door Trim , send me a pm with your cell # , by January 28th, 2020 . That is when the order goes through .
    This will be one run and done for 2020 .

    Thanks
    Jay
    White Mamba ,

  24. #24
    Regional Director
    VOA Member
    since 2013
    Ontario
    J TNT's Avatar
    Join Date
    Oct 2013
    Location
    Ontario,MCVO,PA,OH
    Posts
    2,209
    Thanks to all who placed an order. If anyone else is interested, send me a pm with your cell number.
    Jay.
    White Mamba ,


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •