Results 1 to 17 of 17
  1. #1
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16

    Looking for 2 BBS E19 18 inch REAR Wheels

    I'm looking to complete a set and need 2 BBS E19 Rear wheels in 18 inch size - these are the wheels that came with the competition couple.

    Used-2002-Dodge-Viper-Competition-Coupe-36.jpg

    Picture shows the matching fronts.

    Any leads are also appreciated.
    Last edited by MO_Better; 1 Week Ago at 08:22 PM. Reason: typo

  2. #2
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    UPDATE: Eric at BBS was able to locate a single E19 center for me, so I can rebuild one of my rear wheels as an E19. So now I am only looking for 1 BBS E19 wheel and will take a FRONT or BACK wheel as long as its an 18" center. I'll buy it even if the barrels are damaged as long as the center is intact and reusable. Or I'll buy just a center if that's all you have. Thank you.
    Last edited by MO_Better; 2 Days Ago at 06:57 AM.

  3. #3
    VOA Mamba Member
    since 2013
    Illinois (IL/WI & Other)
    steve911's Avatar
    Join Date
    Oct 2013
    Location
    Cottage Grove, WISCONSIN
    Posts
    767
    Good Luck with the hunt. Did you buy the CC that Viper Exchange was selling?
    Steve A.
    2013 Track Pack, Comp Coupe VCC 062
    2004 SRT10, 2019 Hellcat Charger, 2017 RAM 3500 Dually 4x4

  4. #4
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Yes I did - I love the history - not sure why it means so much to me - but it does!

  5. #5
    VOA Mamba Member
    since 2013
    Illinois (IL/WI & Other)
    steve911's Avatar
    Join Date
    Oct 2013
    Location
    Cottage Grove, WISCONSIN
    Posts
    767
    Quote Originally Posted by MO_Better View Post
    UPDATE: Eric at BBS was able to locate a single E19 center for me, so I can rebuild on of my rear wheels as an E19. So now I am only looking for 1 BBS E19 wheel and will take a FRONT or BACK wheel as long as its an 18" center. I'll buy it even if the barrels are damaged as long as the center is intact and reusable. Or I'll buy just a center if that's all you have. Thank you.
    Would you be interested in selling the centers from your rear wheels when are able to locate another E19 Center?

    Thanks
    Steve A.
    2013 Track Pack, Comp Coupe VCC 062
    2004 SRT10, 2019 Hellcat Charger, 2017 RAM 3500 Dually 4x4

  6. #6
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Yes, that is certainly possible if I find another center. If I can't find a center and have to buy complete wheels, then I probably would not break them apart, though.

    Mark
    Last edited by MO_Better; 2 Days Ago at 06:56 AM.

  7. #7
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    By the way - here is a closeup of the rears - NOTE: THESE ARE NOT THE ONES I'M TRYING TO MATCH - THESE ARE THE ONES I'M REPLACING WITH E19'S.

    I may have the designation wrong - I think Eric may have called them E01's, but mentioned there are a couple versions of them. Does anyone know what these are? Used-2002-Dodge-Viper-Competition-Coupe-33.jpg

  8. #8
    VOA Member
    since 2014
    Southern California
    RedTanRT/10's Avatar
    Join Date
    Nov 2013
    Location
    Dana Point
    Posts
    1,381
    Mo Better, congrats on the purchase, beautiful Comp Coupe!!

    As for your wheels, the fronts are the old style VRL wheels, those rears are the later version World Challenger version.

    Unless you want the vintage look, you should update those fronts to the later WC versions. The WC wheels allow much better airflow.

    Also, you should join the facebook "Viper race Cars owners group" You have to have a viper race car, like your's, to join. That group is much more focused on the race cars and you can network your needs better.

    If you decide to go the WC route, let me know. I have 2 spare wheels I'd condiser selling to a good cause. Easiest to reach me via email. Good luck!! Mike

    mikePbuckingham@gmail.com
    1994 Red/Tan RT/10, '99 red ACR- sold, '06 Red/Silver Coupe-RIP, '06 Red/Silver Coupe - Sold, '08 Red/Silver ACR-C sold, 2006 Comp Coupe C-92

  9. #9
    VOA Mamba Member
    since 2013
    Illinois (IL/WI & Other)
    steve911's Avatar
    Join Date
    Oct 2013
    Location
    Cottage Grove, WISCONSIN
    Posts
    767
    Quote Originally Posted by MO_Better View Post
    Yes, that is certainly possible if I find another center. If I can't find a center and have to buy complete wheels, then I probably would not break them apart, though.

    Mark
    I would consider buying the whole wheel if necessary.
    Steve A.
    2013 Track Pack, Comp Coupe VCC 062
    2004 SRT10, 2019 Hellcat Charger, 2017 RAM 3500 Dually 4x4

  10. #10
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Thank you Mike - that is very helpful info. Yes, I am going with the Vintage look as I don't really plan to race it (unless I do vintage racing), and want to maintain it historically accurate. As one of the 5 original prototypes, when it was a Dodge test vehicle and in magazine shoots it wore the E19's, so I'm trying to get it back to that.

  11. #11
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Quote Originally Posted by steve911 View Post
    I would consider buying the whole wheel if necessary.
    Good to know - I'm learning how hard it is to find just 1 or 2 wheels! Will let you know...

    Mark
    Last edited by MO_Better; 2 Days Ago at 05:41 PM.

  12. #12
    VOA Mamba Member
    since 2013
    Minnesota
    Mbccenter's Avatar
    Join Date
    Oct 2013
    Location
    Minnesota
    Posts
    343
    Quote Originally Posted by MO_Better View Post
    By the way - here is a closeup of the rears - NOTE: THESE ARE NOT THE ONES I'M TRYING TO MATCH - THESE ARE THE ONES I'M REPLACING WITH E19'S.

    I may have the designation wrong - I think Eric may have called them E01's, but mentioned there are a couple versions of them. Does anyone know what these are? Used-2002-Dodge-Viper-Competition-Coupe-33.jpg
    Do you have any fronts to match the rears and make a complete set?
    TT everything

  13. #13
    VOA Member
    since 2014
    Southern California
    RedTanRT/10's Avatar
    Join Date
    Nov 2013
    Location
    Dana Point
    Posts
    1,381
    Quote Originally Posted by MO_Better View Post
    Thank you Mike - that is very helpful info. Yes, I am going with the Vintage look as I don't really plan to race it (unless I do vintage racing), and want to maintain it historically accurate. As one of the 5 original prototypes, when it was a Dodge test vehicle and in magazine shoots it wore the E19's, so I'm trying to get it back to that.
    Mark, got it, makes sense. I know a local CC owner who may still have some of those VRL wheels, I'll reach out to him. You now only need 1, correct? Mike
    1994 Red/Tan RT/10, '99 red ACR- sold, '06 Red/Silver Coupe-RIP, '06 Red/Silver Coupe - Sold, '08 Red/Silver ACR-C sold, 2006 Comp Coupe C-92

  14. #14
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Quote Originally Posted by Mbccenter View Post
    Do you have any fronts to match the rears and make a complete set?
    I'm afraid I do not have the matching WC front wheels. What you see is all that I currently have. I just got the car yesterday and now the real quest begins in which we empty my bank account with parts, wheels, tires, etc, etc.

    Mark
    Last edited by MO_Better; 1 Day Ago at 09:00 AM.
    Mark O'Dell
    2002 Viper Competition Coupe Prototype P4

  15. #15
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Quote Originally Posted by RedTanRT/10 View Post
    Mark, got it, makes sense. I know a local CC owner who may still have some of those VRL wheels, I'll reach out to him. You now only need 1, correct? Mike
    Thank you sir! While I only need one E19 / VRL wheel (since I have procured a center from BBS), I will consider taking 2 as well if that helps the deal go through (sometimes people don't want to part with just one wheel perhaps).

    I am also open to trading my WC rear wheels for VRL rear wheels as well.

    Mark
    Last edited by MO_Better; 1 Day Ago at 09:06 AM.
    Mark O'Dell
    2002 Viper Competition Coupe Prototype P4

  16. #16
    VOA Member
    since 2014
    Southern California
    RedTanRT/10's Avatar
    Join Date
    Nov 2013
    Location
    Dana Point
    Posts
    1,381
    Mo, just heard back. He only has one full set and won't break up. Good luck, go on the FB site I meneioned
    1994 Red/Tan RT/10, '99 red ACR- sold, '06 Red/Silver Coupe-RIP, '06 Red/Silver Coupe - Sold, '08 Red/Silver ACR-C sold, 2006 Comp Coupe C-92

  17. #17
    VOA Mamba Member
    since 2020
    Carolinas
    MO_Better's Avatar
    Join Date
    Oct 2020
    Location
    North Carolina
    Posts
    16
    Quote Originally Posted by RedTanRT/10 View Post
    Mo, just heard back. He only has one full set and won't break up. Good luck, go on the FB site I meneioned
    thank you - I understand completely - I do appreciate you jumping in and helping!

    Mark
    Mark O'Dell
    2002 Viper Competition Coupe Prototype P4


 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •