Page 2 of 2 FirstFirst 12
Results 26 to 31 of 31
  1. #26
    Very cool! Standing by!!!

    Thanks!!!

  2. #27
    Enthusiast
    Join Date
    Jul 2020
    Location
    Sweden
    Posts
    9
    I planned to lower my driver seat this weekend but I don't manage to disconnect the body harness to Driver Seat connector (C, pushed nr 1 forward, holding on to nr 2 and pulling nr 3, in the attached image)?
    Is this the right way to unplug the connector?

    viper kontakt förarstol_Driveviper.jpg
    Last edited by TheSwede; 03-28-2021 at 06:47 AM. Reason: wrong seat

  3. #28
    Regional Vice President
    VOA Mamba Member
    since 2013
    Minnesota
    SNKEBIT's Avatar
    Join Date
    Oct 2013
    Location
    Wisconsin
    Posts
    490
    Some of them seem to get stuck pretty good.
    Sublime Pearl ACRRRR
    M&M Performance

  4. #29
    Enthusiast
    Join Date
    Jul 2020
    Location
    Sweden
    Posts
    9
    Thanks, just needed to push 3 really hard!

  5. #30
    Enthusiast
    Join Date
    Jul 2020
    Location
    Sweden
    Posts
    9
    Moved the gateway (gen 4) forward a bit to stay clear of the seat when lowering.
    Before and after!
    Getway before.jpg
    Gateway after.jpg

  6. #31
    VOA Member
    since 2020
    Ohio
    Steve M's Avatar
    Join Date
    Oct 2013
    Location
    Dayton, OH
    Posts
    4,301
    That came out nice!
    2008 SRT-10 Coupe - Venom Red Metallic w/ White Stripes - 1/4 Mile Passes (YouTube)
    High Flow Cats | Gen 5 Intake Man. | UDP | HPT | 3.55s | MCS | DSS Axles | Nth Moto Clutch | 11.027 @ 130.06 (Vid), 1.78 60' (+1,622 ft DA, w/ 3.55s & Hoosier Drag Radials)


 
Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •