Home › Forums › Gen I / Gen II › Softtop repair

Viewing 5 reply threads
  • Author
    Posts
    • 99RT10
      Member
      November 13, 2013 at 10:14 pm
      Post count: 2988
      #46859

      Get a black Denim patch like you would use on jeans. They work great. If you are not comfortable doing it yourself, take it to your local interior shop. Easy and cheap.

    • 01sapphirebob
      Member
      November 14, 2013 at 3:25 am
      Post count: 2280
      #46902

      99RT10 said:
      Get a black Denim patch like you would use on jeans. They work great. If you are not comfortable doing it yourself, take it to your local interior shop. Easy and cheap.

      This. I did this to my Soft top.

    • plumcrazy
      Member
      November 14, 2013 at 4:00 am
      Post count: 2932
      #46904

      interior shop or boat place that does the side curtains.

    • jwolf
      Member
      November 14, 2013 at 5:01 am
      Post count: 104
      #46916

      I did the same I also put it in spots that show rubbing wear when folded. All on the inside of course.

    • Shannon Whitehead
      Keymaster
      November 14, 2013 at 5:17 am
      Post count: 274799
      #46921

      99RT10 said:
      Get a black Denim patch like you would use on jeans. They work great. If you are not comfortable doing it yourself, take it to your local interior shop. Easy and cheap.

      I did this to my top (on the inside) before any issues started. It was a great way to reinforce the areas prone to wear.

    • Shannon Whitehead
      Keymaster
      June 11, 2025 at 2:03 am
      Post count: 274799
      #10479

      I have a 98 rt/10. The soft top has a very small tear in it. Did not go all the way through. it is just below surface. About 1/4″. Any suggestions what to put on it to keep it from getting worse. I put a piece of Monster tape on the underside. About a 1″ piece. Cannot see it because it is all the way in the back. Any thoughts or suggestions would help. Thank you.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.