Home Forums Gen III / Gen IV 04 Viper clicking sound from asd relay and under the car. help

Viewing 1 reply thread
  • Author
    Posts
    • Shannon Whitehead
      Keymaster
      Post count: 274799

      I would test the battery voltage now at the battery…and, at the PDC. If low, fully and properly charge battery (disconnected from car to be safe). I would also remove and reseat said relay…consider swapping it with a nonessential one. It also might be wise to check connections at your starter.

    • Shannon Whitehead
      Keymaster
      Post count: 274799

      i just installed a new optima battery today and noticed a clicking sound coming from the relay box and under the car when i connected the wires. they would be a couple seconds apart and when i start the viper, it idles rough at 500rpm cold start. usually it idles at 1k.

      i know the battery is good since its new and i load tested it before shoving it in. the ground cable is also has a good contact. everything works. alarm lights doors. i just can’t figure out why it idles rough now and has the 2 clicking sounds. no engine lights at all.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.