The passenger side would not operate. I pulled the door MOD fuse/relay, reinserted then window would go up. Rolled down, held button down for 10 seconds. Then opened door, window would go down 1/2″ like normal, close door, but window would not return to full up position.
I get in car, doors shut), push accessory, window will go down but will not go up. I can hear relay clicking in door, but no window action?
Any suggestions?

Answer by: Eddie Martin
Has recall for door modules been done? If any of the parts in the door have been unplugged or replaced the window adjustment procedure must be done. Sit inside the car on or running, doors closed, roll both windows down till you hear the click of the relay and roll up same way a few times.
Then cycle key. See if that helps?

Answer by: Doug Levin
It sounds like a bad window control module located inside the door. They get contaminated with water and cause all types of issues. We’ve had to replace them on others.

Answer by: Alex Macevicius
Would need to know if it doesn’t work from both switches? If you pull and replaces the fuse will the window go up again but only work one time? Looks like we would really need more info on symptoms.