Home › Forums › Gen III / Gen IV › Belanger headers and Corsa exhaust in Classifieds.
-
AuthorPosts
-
-
so the exhaust you are selling will not work with the headers correct? Bellangers have a 3″ collector and the corsa you have has a 2.5″ inlet…
-
Man, it really did work! Headers are sold!
proedge said:
so the exhaust you are selling will not work with the headers correct? Bellangers have a 3" collector and the corsa you have has a 2.5" inlet…The Corsa exhaust is 3″, but they make 2 different inlet sizes (2.5″ for OEM cats and 3″ for aftermarket cats/headers). The exhaust I’m selling has the 2.5″ inlet. You can easily add a 3″-to-2.5″ reducer on the end of the headers to mate up to my Corsa exhaust or have an exhaust shop cut the 2.5″ inlet off and put a 3″ on.
-
98intrigue said:
Man, it really did work! Headers are sold!I actually just made a post this morning about the visibility of classified ads here. You really have to be on the lookout for something specific, rather than stumbling over finding something I buy on a snap judgement. Hopefully they will get an update in place to help that out.
-
FrgMstr said:
I actually just made a post this morning about the visibility of classified ads here. You really have to be on the lookout for something specific, rather than stumbling over finding something I buy on a snap judgement. Hopefully they will get an update in place to help that out.Its being discussed as we speak. 😀
-
If it worked for FrgMstr so quickly, hopefully it will work for me 🙂 Let me know if you have any questions.
http://driveviper.com/classifieds/exhaust/p498-gen-3-belanger-headers.html
http://driveviper.com/classifieds/exhaust/p583-corsa-ehaust-for-gen-3.html
-
-
AuthorPosts
- You must be logged in to reply to this topic.