Gauging Interest: Carbon Ceramic Brakes on Gen 3/4 Viper

[Shannon Whitehead]

#91247

[Shannon Whitehead]

#91305

ACRucrazy said:

What’s the price on that setup? I’m not real familiar with the company. Looking at the pics there isn’t much in the way of ventilation holes along the radial edge.

[TooBlue]

#91359

I would be interested as well…

One of the guys I track with has a 2011 Carbon edition Z06. He runs 18″ wheels all the way around without any problems.

[Shannon Whitehead]

#91365

There was a company at SEMA trying to get into the aftermarket ceramic brake sets. fusionbrakes.com was the company. They are pretty much what I’d call a start up, nothing available at the show as they are trying to make a launch this year. They had Porsche and Vette brake systems starting around $10k and going to $20k. IIRC, you cannot just use the ceramic rotor, you had to use the corresponding caliper with it.

[Shannon Whitehead]

#91367

Those were made by a local company, Nth Moto, not sure on the price.

[Shannon Whitehead]

#12803

I’m doing a little investigating and considering pursuing carbon ceramic brakes on my Viper. I’m looking at the same rotor as the ZR1 vette. 15.5″ fronts, 15″ rears with the 6 piston/4 piston brembo caliper setup. At least 1 company out there has stated that CCM-R brakes would be around $30k for a set of 4 which for most of us is out of the question. My preliminary investigations have shown that a complete setup will be about $7k plus the cost of new hats and mounting brackets with the Viper 6-lug bolt pattern. I’ll be investigating the cost of replacement hat manufacturing and caliper bracket here soon. Would anyone be interested in something like this? I’m not a vendor but just curious if anyone else wants carbon ceramics on their car. I’m not sure if they would fit with the 18/19 setup. I’ll investigate that as well.

[Author]

Posts