Gen 2 sway bar

[Shannon Whitehead]

#71582

I can’t answer your original question, but if you want to change out the bushings as you stated…these are real nice…

Replacing Stabilizer Bar Retainers and Bushings – GEN II

[Shannon Whitehead]

#71595

actually your location brings up a question, was thinking of a round trip this June through Washington/Oregon then east to Yellowstone then up through Alberta badlands but was not sure what the access to the park was like for a viper(dirt roads,etc). So any pointers? Also I ordered the Energy bushings kit but have about a quarter inch play between the edge of the bushing and the collar on the bar. Energy says it is the right kit but I say BS on the space yet on the stock and your setup I see it is tight

[Shannon Whitehead]

#11758

Tweaked the front sway bar in my GTS last fall, checked with my insurance company and they are going to cover a new one so am looking at some options on a new one. I have left numerous messages with VPA with no response so have given up on them, even went so far as to go to a local dealer for a new oil pan gasket($236 so not too horrible). Car is a 97 so are there better alternatives?(hollow,solid,ACR), Only want new and could change bushings if necessary

[Author]

Posts