Home Forums Gen V window won’t move Reply To: window won’t move

Profile photo ofShawn HawalkaHootie
Post count: 29

This may help. Does it move with the door closed?  If it does move with door closed, the issue is it needs to relearn the glass travel. Close door, window up to stop and hold switch. Back down and hold. Repeat a few times and it will set the travel limits. If that calibration is lost (mine was lost when I replaced regulator) the window would not operate with door open. This is a safety net to prevent you from rolling it up all the way, then closing the door and the glass smashing into the roof. Won’t operate until it knows the end points.